Description
| Length / Width: | 48 feet x 102 inches |
| Suspension Type: | Wide Spread Air |
| Frame Rating: | 80,000 lbs distributed – 55,000 lbs concentrated in 4 feet- GAWR and tire ratings determine legal payloads |
| Flooring: | 1 1/8 inch aluminum with 4 Apitong wood nailer strips |
| Crossmembers: | 12 inch centers – 4 inch jr. I-steel |
| Single Coil Hauling Package: | Included – STANDARD |
| Side Rails: | Exclusive Revolutionary RASR Rail Technology — one piece routed aluminum designed for strength and impact |
| Chain Cargo Tie Downs | 15 pair recessed in siderails |
| Stake Pockets: | Routed aluminum on 24 inch centers (2 load securement openings between stake pockets) |
| Rubrail: | Integrated with siderail |
| Main Beams: | 130K load bearing flanges |
| Kingpin: | 30 inches |
| Loaded Fifth Wheel Height: | 49 inches |
| Landing Gear: | OEM Standard |
| Knee Braces: | Fabricated on approx. 60 inch C/C |
| Bulkhead Pockets: | 4 DOT type bulkhead pockets only – welded to front |
| Bulkheads: | None – STANDARD |
| Number of Axles: | 2 |
| Axle Spindle: | Tapered |
| Brakes: | Spring brakes, auto slacks |
| Air Line Filters: | (2) Meritor In-line type installed |
| ABS: | 4S/2M – no cable or tool |
| Axle Spread: | 122 inches – set ahead to Cal Dimensions of 40’ C/L KP to C/L rear axle |
| Hub and Drums: | 10-hole hub-piloted with outboard cast drums |
| Wheel Ends: | Grease in hubs – *** 5-year wheel end warranty *** |
| Wheels: | 22.5 x 8.25 (4) steel disc inside wheels – (4) Alcoa aluminum LvL One buffed outside |
| Tires: | 295/75R 22.5 14PR OEM standard tires – STANDARD |
| Tire Inflation System: | None – STANDARD |
| Suspension Detail: | Hendrickson AANT23K Intraax air ride |
| Auto Glad Hand Dump: | Installed |
| Electric Dump Valve: | Wired to 7-way auxiliary socket to dump rear axle |
| Air Lift: | None – STANDARD |
| Front Corners: | Tapered steel |
| Electrical System: LED: | 3 lights/side, 2 lights/side on rear – STANDARD |
| Paint: | Black urethane on steel parts with Infinity decals – STANDARD |
| Conspicuity Tape: | Per NHTSA specs – installed in recess on rubrails |
| Bumper: | Weld-on type – meets underride requirements – painted steel |
| Mudflaps: | 2 sets OEM standard; Spring loaded brackets behind front axle |
| Spare Tire Carrier: | None – STANDARD |
| Winch Track: | Full length integrated double L type aluminum on both sides — STANDARD |
| Sliding Winches: | 12: 6 each side; sliding Rope Hook/ Winch Strap Hook Retainers — STANDARD |
| Dock Bumpers: | 1 pair rubber on rear |
| Hubodometer: | None – STANDARD |
| Registration Holder: | Install registration holder – OEM standard |
| Tool Box: | 1 aluminum double door box – 24 inches x 24 inches x 60 inches – installed Curb Side between spread axles |
| Estimated Weight | 10,177lbs. +/- 3% |
STOCK #44288, 44289, 44290, 44291
Reviews
There are no reviews yet.